- Component
- Motherboard
- intel Motherboard
- GIGABYTE
- Gigabyte Z590 Gaming X Intel 10th and 11th Gen ATX Motherboard
- Stock: Out Of Stock
- Model: Z590 Gaming X
- Supports 11th and 10th Gen Intel Core Processors
- Triple Ultra-Fast NVMe PCIe 4.0/3.0 x4 M.2
- Dual-Channel DDR4, 4 DIMMs
- Fast 2.5GbE LAN
| Basic Information | |
| Supported CPU | 11th Generation Intel Core i9 processors / Intel Core i7 processors / Intel Core i5 processors 10th Generation Intel Core i9 processors / Intel Core i7 processors / Intel Core i5 processors / Intel Core i3 processors/ Intel Pentium processors / Intel Celeron processors |
| Chipset | Intel Z590 Express Chipset |
| BIOS | 1 x 256 Mbit flash Use of licensed AMI UEFI BIOS PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0 |
| Form Factor | ATX Form Factor; 30.5cm x 24.4cm |
| Audio | Realtek Audio codec High Definition Audio 2/4/5.1/7.1-channel Support for S/PDIF Out |
| Expansion Slots | |
| PCI | 1 x PCI Express x16 slot, running at x16 (PCIEX16) * For optimum performance, if only one PCI Express graphics card is to be installed, be sure to install it in the PCIEX16 slot. (The PCIEX16 slot conforms to PCI Express 4.0 standard.) *Supported by 11th Generation processors only. 1 x PCI Express x16 slot, running at x4 (PCIEX4) 2 x PCI Express x1 slots (The PCIEX4 and PCI Express x1 slots conform to PCI Express 3.0 standard) |
| M.2 Socket | 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_CPU) *Supported by 11th Generation processors only. 2 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2A_SB) (M2M_SB) |
| Memory Specifications | |
| Memory Type | Dual-channel memory architecture |
| Slots | 4 x DDR4 DIMM |
| Supported Memory Type | 11th Generation Intel Core i9/i7/i5 processors: Support for DDR4 5333(O.C.)/ DDR4 5133(O.C.)/ DDR4 5000(O.C.)/ 4933(O.C.)/ 4800(O.C.)/ 4700(O.C.)/ 4600(O.C.)/ 4500(O.C.)/ 4400(O.C.)/ 4300(O.C.)/ 4266(O.C.) / 4133(O.C.) / 4000(O.C.) / 3866(O.C.) / 3800(O.C.) / 3733(O.C.) / 3666(O.C.) / 3600(O.C.) / 3466(O.C.) / 3400(O.C.) / 3333(O.C.) / 3300(O.C.) / 3200(O.C.) / 3000(O.C.) / 2933 / 2800 / 2666 / 2400 / 2133 MHz 10th Generation Intel Core i9/i7 processors: Support for DDR4 2933/2666/2400/2133 MHz memory modules 10th Generation Intel Core i5/i3 /Pentium/Celeron processors: Support for DDR4 2666/2400/2133 MHz memory modules 4 x DDR4 DIMM sockets supporting up to 128 GB (32 GB single DIMM capacity) of system memory Dual-channel memory architecture Support for ECC Un-buffered DIMM 1Rx8/2Rx8 memory modules (operate in non-ECC mode) Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules Support for Extreme Memory Profile (XMP) memory modules |
| Max. Memory | 128 GB (32 GB single DIMM capacity) |
| Connector & Ports | |
| USB (s) | 1 x USB Type-C port on the back panel, with USB 3.2 Gen2 support 1 x USB Type-C port with USB 3.2 Gen1 support, available through the internal USB header 1 x USB 3.2 Gen2 Type-A port (red) on the back panel 7 x USB 3.2 Gen1 ports (5 ports on the back panel, 2 ports available through the internal USB header) Chipset+ 2 USB 2.0 Hub: 6 x USB 2.0/1.1 ports (2 ports on the back panel, 4 ports available through the internal USB headers |
| LAN Port (s) | Realtek 2.5GbE LAN chip ( 2.5 Gbit/ 1 Gbit/100 Mbit) |
| Supported Storage | 1 x M.2 connector (Socket 3, M key, type 2260/2280/22110 PCIe 4.0 x4/x2 SSD support) (M2P_CPU) 2 x M.2 connector (Socket 3, M key, type 2260/2280/22110 SATA and PCIe 3.0 x4/x2 SSD support) (M2A_SB) (M2M_SB) 6 x SATA 6Gb/s connectors Support for RAID 0, RAID 1, RAID 5, and RAID 10 |
| Audio | 6 x audio jacks |
| Internal I/O Ports | 1 x 24-pin ATX main power connector 1 x 4-pin ATX 12V power connector 1 x 8-pin ATX 12V power connector 1 x CPU fan header 4 x system fan headers 2 x addressable LED strip headers 2 x RGB LED strip headers 6 x SATA 6Gb/s connectors 3 x M.2 Socket 3 connectors 1 x front panel header 1 x front panel audio header 1 x S/PDIF Out header 1 x USB Type-C header, with USB 3.2 Gen1 support 1 x USB 3.2 Gen 1 header 2 x USB 2.0/1.1 headers 2 x Thunderbolt add-in card connectors 1 x serial port header 1 x Clear CMOS jumper 1 x Q-Flash Plus button |
| Graphics | |
| Graphics | Integrated Graphics Processor-Intel HD Graphics support: 1 x DisplayPort, supporting a maximum resolution of 4096x2304@60 Hz. Support for AMD Quad-GPU CrossFire and 2-Way AMD CrossFire technologies |
| Others Information | |
| Special Features | Support for APP Center @BIOS EasyTune Fast Boot Game Boost ON/OFF Charge RGB Fusion Smart Backup System Information Viewer Support for Q-Flash Plus Support for Q-Flash Support for Xpress Install |
| Warranty Information | |
| Manufacturing Warranty | 3 years |
Gigabyte Z590 Gaming X Intel 10th and 11th Gen ATX Motherboard
Gigabyte Z590 Gaming X Motherboard From GIGABYTE. Whether You Are Upgrading Or Starting A Fresh Build, You Will Find A Wide Range Of Capabilities Within The Z590 GAMING X, Making This Ideal For Any Builder Focusing On Gaming-Based Components. The Z590 Chipset Gives You Access To An Intel LGA 1200 Socket, Suitable For A Variety Of Processors. Four Dual-Channel DDR4 RAM Slots Can Handle Memory Modules Up To 5333 MHz (O.C.) For Enhanced Multitasking Capabilities. Six SATA III And Three M.2 Storage Interfaces Allow You To Install Various Storage Drives Including PCIe 3.0 And 4.0 NVMe Solid-State Drives For Enhanced System Performance. You Can Use Various Graphics And Utility Cards With One PCIe 4.0 X16, One PCIe 3.0 X16, And Two PCIe 3.0 X1 Slots. USB 3.2 Gen 1 And Gen 2 Ports Allow You To Experience Enhanced Transfer Speeds For External Storage Devices As Well As Resource-Demanding Peripherals. A 2.5 GbE RJ-45 Port Is Available For Enhanced Network Performance, Essential For Competitive Online Gaming. Various Addressable RGB Headers Allow You To Set Up Custom Lighting Effects For A Truly Unique Style.
Questions
Have question about this product? Get specific details about this product from expert.No questions have been asked about this product.